Loading ...
Loading ...
Loading ...
6 English
a dimmer control switch. Do not use this heater with a timer
designed to automatically turn the unit on or off, as this may
accidentally disable the heater’s thermal cutout safety feature.
- Use of this appliance on the same electrical circuit as another
high energy use product, such as a vacuum cleaner, blender,
variable speed fan or circular saw is not advised.
- Risk of re. Do not operate any heater with a damaged cord
or plug or after the heater malfunctions, has been dropped or
damaged in any manner. Discard heater, or return to a Vornado
authorized service facility for examination and/or repair.
- Do not sit or stand on product.
- Never use the cord as a handle or otherwise yank, strain or
stretch the power cord.
- Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause an electric shock or re,
or damage the heater.
- Check your heater cord and plug connections. A loose tting
outlet can cause the plug to overheat or cause a re. Be sure
plug ts tight in the outlet. Check frequently during use to
make sure plug and outlet are not hot. If so, discontinue using
heater and have outlet replaced by a qualied electrician.
- Never ignore the signs of an electrical problem, such as: warm
outlet coverplates, sparks when plugging in or operating,
lights flickering/dimming during operation. Immediately turn
off and unplug the appliance if any such problems are noticed.
Contact a qualied electrician to investigate possible causes
before operating the appliance again.
- Note: Heaters draw more current than small appliances,
overheating of the outlet may occur even if it has not
occurred with the other appliances.
- Before moving, repositioning, servicing, cleaning and when
not in use, use the product controls to turn off the power
and then unplug. To disconnect from outlet, grasp and pull
only the plug. Also, power off and unplug if the product will
be left unattended for an extended period of time or during
electrical storms.
- This appliance has a polarized plug (one blade is wider than
the other.) To reduce the risk of electrical shock, this plug is
intended to t in a polarized outlet only one way. If the plug
does not t fully in the outlet, reverse the plug. If it still does
not t, contact a qualied electrician. Do not attempt to
defeat this safety feature.
- If your heater suddenly stops working:
• This heater is equipped with a thermal cutout safety feature
designed to automatically shut off when overheating is
detected. See the “RESET HEATER” instructions in this
guide to determine how to check and reset the heater.
• If the heater and other electrical products suddenly stop
working at the same time, your home circuit breaker
or fuse may have tripped due to an overload of power.
Consider only running your heater on the “low” setting,
only running one heater at once and unplugging all other
electrical products while running the heater, and/or hiring
an electrician to install an additional circuit to your home’s
electrical system.
SERVICING WARNING—To reduce risk of re, electrical
shock and injury to persons, observe the following:
Loading ...
Loading ...
Loading ...