Loading ...
Loading ...
Loading ...
Installing this product into a combustible
enclosure
without an appropriate
non-combustible barrier could result in fire,
property damage and personal injury.
The Built in model is designed for easy installation into a non-combustible masonry enclosure.
The BBQ must be surrounded by non-combustible material like Brick or Hardibacker but should
never be installed into a wood island without a non-combustible barrier surrounding the gas appliance
accessory.
The gas appliance drops into the cutout opening and sits on top of the countertop resting on the side
and back flanges of the appliance. There is no need to fasten the gas appliance to the island.
Accessory must be able to be removed for general maintenance so do not grout sides or fasten in.
There is a minimum of 6" clearance behind the appliance. There is a required 14" clearance on each
side of the gas appliance accessory
Minimum clearance from sides and back of unit to adjacent combustible
construction below the countertop where the unit is installed are 16”
from sides and 16” from back.
Use your gas appliance at least 16" away from any wall or surface.
Use your gas appliance 16" from any combustible objects that can
melt or catch fire such as vinyl or wood siding, fences, overhangs,
or any other sources of ignition; including pilot lights and live
electrical appliances.
Do not use your gas appliance under any overhead combustible
construction. Never use your gas appliance accessory in a garage,
porch, shed, breezeway, or any other enclosed area.
Never use your gas appliance accessory on a balcony, deck, or patio
above the ground floor of your home.
In windy conditions, always position the front of the gas appliance
to face oncoming wind to reduce heat and smoke blowing in your face,
and to prevent potential hazards to yourself and the gas appliance.
6"
Page 19
!s<Hn <OHU"n<UO O' <O5UdMn<UO
Loading ...
Loading ...
Loading ...