Loading ...
Loading ...
Loading ...
66
PRODUCT INSTALLATION (cont.)
3. Connect T-Valve to the Toilet Tank Fill Valve
a. Place the Rubber Washer into the T-Valve.
b. Install the T-Valve with the Rubber Washer to the
incoming water connection on the bottom of your
Toilet Tank.
4. Connect the Water Supply Line coming from the wall to
the bottom of the T-Valve.
5. Install Mounting Plate
a. Place Adjustable Mounting Plate over mounting holes
on toilet, rubber side faces down, curved edge faces
toward the toilet tank.
b. Place the Adjustable Brackets groove side down on
the center of the square opening in the Mounting Plate,
then insert Mounting Bolts through the Adjustable
Brackets and through the bolt holes in your toilet.
Be sure that the square Mounting Bolt Head is flush
with the sides of the Adjustable Bracket.
c. Slide barrel nut onto Mounting Bolts under the toilet
bowl and tighten to keep Mounting Plate in place.
NOTES:
• The T-Valve connects to the Fill Valve directly under
your Toilet Tank - it does not connect at the wall.
• Only connect to the cold toilet water supply line.
• If your water supply line is rigid, you may need to
replace it before continuing.
Steps 5b & 5c
Steps 3-4
Step 3a
toilet tank
t-valve
cold water
supply line
NOTES:
• You may wish to place a container under the tank to
catch any excess water.
• Do not continue without completing the above steps.
• Failure to do so could result in flooding, leaking or
damage to the Swash.
2. Turn o Water Supply Valve and flush toilet
a. Turn Water Supply Valve o to stop the flow of water.
b. Flush toilet and hold down handle to completely
empty tank.
c. Disconnect water supply hose from toilet tank.
Do not disconnect from the Water Supply Valve.
Step 2c
CONNECTING THE COLD WATER SUPPLY (CONT.)
Loading ...
Loading ...
Loading ...