Loading ...
V2 ENGLISH 22-0923
Insert the straightened wire into either of the
two holes of the hot and neutral locations on
the side of the outlet. Power passes between
the two corresponding holes for pass-thru
wiring. Attach the ground wire to the bottom
of the outlet.
6 Tighten every screw
and make sure that no
bare copper wire is
exposed.
7 Carefully insert the
outlet into the wall box.
8 Secure the outlet to the
wall box with the two
long screws (provided).
9 Secure the wall plate to
the outlet with the two
short screws
(provided).
10 Restore power by
replacing the fuse or
turning on the circuit
breaker. The outlet is
ready to use.
USING THE OUTLET
• To charge USB devices (like mobile phones or
tablets), plug USB cables into the USB ports on
the outlet and into the USB ports on the devices.
• To power electrical devices (like lamps or laptop),
plug them into the electrical outlets.
SPECIFICATIONS
Dimensions (H × W × D)
• With plate:
4.7 × 3 × 1.9 in. (120 × 76 × 47.5 mm)
• Without plate:
4.2 × 1.7 × 1.9 in. (106 × 43 × 47.5 mm)
Electrical
• Receptacle rating: 15Amp, 125VA
• USB rating: Two USB ports with total 3.6A, 5V DC
• Line voltage: 125V AC @ 60Hz
• Wire terminals: #14-#12 AWG
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
THREEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289
(U.S. and Canada)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2022 Best Buy. All rights reserved.
NS-HW36A2P_22-0923_QSG_V2_EN_Final.ai 2 11/8/2022 8:55:04 AM