Loading ...
Loading ...
Loading ...
42
BEFORE REQUESTING SERVICE
Symptoms and Questions Possible Cause/Solution
Oven light does not work
The light bulb is loose or defective.
Tighten or replace the bulb.
The plug on the range is not completely inserted in the electrical outlet.
Make sure the electrical plug is inserted into a live, properly grounded outlet.
Oven will not self-clean
The oven temperature is too high to set a self-clean operation.
Allow the range to cool to room temperature and reset the controls.
Improper oven controls setting.
See the “SELF CLEAN” section.
“Crackling” or “popping” sound
This is the sound of the metal heating and cooling during both the cooking
and cleaning functions.
This is normal.
Too much smoking during a self clean cycle.
Too much soil.
Press the
CLEAR OFF
button. Open the windows to clear the smoke from
the room. Wait until the
DOOR LOCKED
light goes off. Wipe up the excess
soil and reset the clean cycle.
Oven door will not open after a self-clean
cycle
The oven temperature is too high.
Allow the oven to cool below locking temperature.
This can take up to 1 hr after the cycle is complete.
Oven not clean after a self-clean cycle
Improper oven controls setting.
See the “SELF CLEAN” section.
The oven was heavily soiled.
Clean up heavy spillovers before beginning the self- clean cycle. Heavily
soiled ovens may need to self-clean again or for a longer period of time.
“CLOSE DOOR TO CONTINUE BROILING”
or “DOOR OPENED” appears in the display
The broil or self-clean cycle has been selected but the door is not closed.
Close the oven door.
“DOOR LOCKED” light is on when you want
to cook
The oven door is locked because the temperature inside the oven has not
dropped below the locking temperature.
Press the
CLEAR OFF
button. Allow the oven to cool.
Oven control beeps and displays any F
code error.
You have “F6”.
Press the
CLEAR OFF
button. Allow the oven to cool for one hour. Put the
oven back into operation.
You have “F9”.
Check the main gas shut-off valve or the oven gas shut-off valve(see “Surface
burners light but oven burner does not” column).
If the function code repeats.
Disconnect all power to the range for 5 minutes and then reconnect power. If
the function error code repeats, call for service.
Oven racks are difficult to slide
The oven racks were cleaned in a self-clean cycle.
Apply a small amount of vegetable oil to a paper towel and wipe the edges of
the oven racks with the paper towel. Do not use lubricant sprays.
Power outage, clock flashes
Power outage or surge.
Reset the clock. If the oven was in use, you must reset it by pressing the
CLEAR OFF
button, setting the clock and resetting any cooking function.
“Burning” or “oily” odor emitting from the
vent
This is normal in a new oven and will disappear in time.
To speed the process, set a self-clean cycle for a minimum of 2 hours. See
the “SELF CLEAN” section.
Loading ...
Loading ...
Loading ...