Loading ...
Loading ...
Loading ...
- 7 -
ASSEMBLY
Installation Preparation:
1. Please prepare a carpet or mat to protect your floor you need to spread
out all the accessories.
2. Please prepare gloves to avoid being scratched by sharp parts that
may occur during installation.
3. Please open all the boxes to check that the accessories are complete
and in good condition.
4. If you need to use power tools to install this product, please set the
speed to low speed in advance.
Step1
：
Read and understand instructions before beginning. Flush with
water prior to use. Use PTFE tape on all plastic threaded joints.
Connect the Handle (2) to the Pump Body (1) and lift the rod with
Machine Screws (5), Lock Nuts (6) and Washers (7).
Loading ...
Loading ...
Loading ...