Loading ...
Loading ...
Loading ...
INSTALLING SANDING DISC
• Disconnect sanderfrom power supply,
•Assemblepartsas shownin Figure9.
• Placewasher on spindle,then threadrubberback-up
pad ontospindle.Lock spindleby depressingspindle
lockbuttonand handtighten beck-uppad.
•Positionback-updiscand sandingdiscin place and
threadflange nutonto spindle.Tightenflange nut
securelybyturningthe sandingdisc clockwiseby hand.
,_ WARNING: Use onlythe back-uppad and back-
updisc suppliedwithyourtool, Other types of pads
or discscould disintegratecausingpossiblesedous
personalinjury.
SANDING
See Figure 10,
The matedal beingsanded shouldbe heldfirmly,Secure
smallworkpiece ina vise orclamp toworkbench.
Hold yoursanderinfront and away from you with both
hands.Withthe sendingdisc clearof theworkpieca,start
your sanderand letthe motor reach itsmaximumspeed,
then lowertothe work surfaceat a slight5 to 8 degree
angle. See Figure 10. Do notallowthetoolto remainin
one place,This willcause uneven sandingor gougingof
the work. Keepyour sanderslowlymovingoverthe work.
_l, WARNING: Keep a firm grip on the handlesof your
toolwithboth handsat alltimes, Failureto do so
could result in lossofcontrolleadingto possible
seriousinjury,
This toolwas designed sothat the weightofthetoolalone
willprovideadequateweight onthe sandingdisc.Extra
pressurewillonlyresultin unevenwork, slowersanding
from slowerspeed,and possiblemotorbum-out,
Uponcompletionof work,or a sending operation,liftyour
sanderaway from work surface beforeturningoff.
_lh WARNING: Sandingdisc must cometo a
completestop beforesettingtooldownon
workbench, Failureto do socan cause thetoolto
be thrownfrom workbenchbecause of sending disc
rotation.This couldresultin damage tothe toolor
possiblesedouspersonalinjury,
To removepaint,varnish,or rust, send withan opankote
type sandingdisc.
Anothermethod of removingpaintor rustis by wire
brushing,The wirecup brushmay bethreaded directly
ontothe spindle,
AUXILLeIRY
HANDLE
FLANGENUT
Fig.9
_, WARNING: Always wear protectivegoggles.
Sparks, wire and loose particlescan be thrown
while usinga wire brush.Use ofyour sander
withoutgogglescould result in seriouspersonal
injuwy.
Fig. 10
Loading ...
Loading ...
Loading ...