Loading ...
Loading ...
www.PyleUSA.com
2
OPERATION INSTRUCTIONS:
1. V1 connect the left optic camera signal; V2 camera signal connection
(reverse priority display); V3 connection right camera signal.
2. Trigger (rearview camera line) displays rear camera screen; trigger (left
video line) shows the left optic camera; trigger (right video line) display
right depending on the camera screen; no automatic trigger machine
after shutdown.
3.Press the menu button to display the menu, then press (regulation) (or
regulation) can adjust the size parameters.
4.The environment sensing function, the screens brightness may change
while the changing of ambient light, if ambient light is strong, the
brightness of the screen will increase, in order to get a clearer image in
the same light; when the ambient light is weak, the brightness of the
screen can be reduced. Make sure the brightness is right, not too bright
and irritating to the eyes.
Rearview Backup Camera Quick Installation:
Connect the camera to the using the included DC 12V power cable.
Connect the DC 12V power cable to the positive 12V reverse tail light in the
rear of your vehicle. Then, connect the black wire, of the DC 12V power
cable, and ground properly. This connected power and ground cable then
connects to the camera, and will supply power to the camera directly.
Next, use the included yellow RCA video connector cable, and run that
cable from the yellow RCA video connector jack of the camera, to the yellow
video connector of your compatible display monitor.
Yellow RCA cable when connected, automatically retrieves the video signal
when activated (when your vehicle is switched into the reverse gear).
1. Locate the reverse taillight wiring behind your vehicle's reverse light. You
may need to remove an interior panel, or other cover, in order to locate
the wiring. Connect the included power 12V DC power cable to the
reverse light.
a. Connect the power cable's Red wire to your vehicle's reverse light positive
wire.
b. Connect the power cable's Black wire to your vehicle's reverse light
negative wire.
2. Connect the camera to this 'reverse light' connection installation, then
mount the camera in the desired location.
3. Run the RCA video cable from the camera to your compatible video
display monitor.
Loading ...
Loading ...
Loading ...