Loading ...
Loading ...
Loading ...
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
DisconnectedConnected
2.
X
If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least one second to enter the
Timekeeping Mode.
3.
X
Hold down (D) for at least three
seconds. Release the button when [FIND]
starts to flash at low speed.
The phone will sound a tone when it
establishes a connection with the watch.
●
It will take a few seconds before the
phone tone sounds.
Searching for the
phone
Preparing to search
for the phone
4.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Configuring Watch Settings
Alarm time, timer start time, and other settings
can also be configured using BABY-G
Connected.
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
e
start to flash.
When a connection is established
between the watch and phone, [CNCT]
and
e
will stop flashing and remain on the
display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
e
start to flash.
When a connection is established
between the watch and phone, [CNCT]
and
e
will stop flashing and remain on the
display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with BABY-G Connected.
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
e
start to flash.
When a connection is established
between the watch and phone, [CNCT]
and
e
will stop flashing and remain on the
display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
ConnectedTrying to connect
3.
Y
Use BABY-G Connected to check the
charge level.
Watch Operation Guide 5659
13
Loading ...
Loading ...
Loading ...