Dewalt DCF888D2 Instruction Manual

Loading ...

English

NOTICE: Always check the tool configuration prior

to use. If you are unsure of the current configuration,

press the mode selector button

(Fig. F) to set the

tool to the Home setting as described on the label and

thismanual.

This tool is capable of connecting with mobile devices that

support Bluetooth® Smart (or Bluetooth® 4.0) technology.

(To see if your mobile device is compatible, visit: http://

www.bluetooth.com/Pages/Bluetooth-Smart-Devices-List.

aspx)

DEWALT Tool Connect™ is an optional application for your

smart device (such as a smart phone or tablet) that connects

the device to your tool to allow you to configure specific

tool functions. Refer to ModeSelector.

nOTE: The Bluetooth® word mark and logos are registered

trademarks owned by the Bluetooth®, SIG, Inc. and any use

of such marks by

DEWALT is under license. Other trademarks

and trade names are those of their respectiveowners.

nOTE: The Tool Connect™ App is governed by separate

terms and conditions available for viewing through the

mobileapplication.

Download the

DEWALT Tool Connect™ applicationat:

• Follow the instructions in the app to create your Tool

Connect™account.

• On the Home screen of the app, select "+ Tool" to begin

the process of adding your tool to the app.

• To connect your tool with the

DEWALT Tool Connect™

app, at the appropriate screen, press the mode selector

button

for 3–5 seconds, then wait for the tool to

connect. The tool can only be connected to one Tool

Connect™ account at a time.

• Once the tool has been connected, you can confirm that

you would like to register the product.

For more information on

DEWALT Tool Connect™

functionality and features, please call 1–800–4-DEWALT

(1–800–433–9258), visit www.DEWALT.com or view

the FAQ page and help screens located inside the

mobileapplication.

Coin Cell Battery

Bluetooth® capability is powered by one coin cell battery in

your tool, that when necessary, should be replaced by your

local DEWALT service center. Do not attempt to replace the

coin cell batteryyourself.



WARNING: Danger of explosion if battery is

incorrectlyreplaced.



WARNING: DO NOT INGEST BATTERY; CHEMICAL

BURN HAZARD. This product contains a coin/

button cell battery. If the coin/button cell battery is

swallowed, it can cause severe internal burns in just

2hours and can lead todeath.

• Keep new and used batteries away from children.

If the battery compartment does not close

securely, stop using the product and keep it away

fromchildren.

• If you think batteries might have been swallowed

or placed inside any part of the body, seek

immediate medicalattention.

• If the coin cell battery contents come into contact

with the skin, immediately wash area with mild

soap and water. If coin cell battery liquid gets

into the eye, rinse water over the open eye for

15 minutes or until irritation ceases. If medical

attention is needed, the battery electrolyte is

composed of an organic solvent and lithiumsalts.

• Do not incinerate or dispose of tool together with

household waste material! Tool that has reached

the end of its life must be collected separately

and returned to an environmentally compatible

recyclingfacility.

OPERATION



WARNING: To reduce the risk of serious personal

injury, turn unit off and remove the battery pack

before making any adjustments or removing/

installing attachments or accessories. An

accidental start-up can causeinjury. Exception—Tool

Connect™ functions and mode adjustments require

battery to beinstalled.

NOTICE: Always check the tool configuration prior

to use. If you are unsure of the current configuration,

press the mode selector button

(Fig. F) to set the

tool to the Home setting as described on the label and

thismanual.

Installing and Removing the Battery Pack

(Fig. G)

nOTE: For best results, make sure your battery pack is

fullycharged.

Fig. G

To install the battery pack

6

into the tool handle, align the

battery pack with the rails inside the tool’s handle and slide

it into the handle until the battery pack is firmly seated in

the tool and ensure that it does notdisengage.

To remove the battery pack from the tool, press the release

button

5

and firmly pull the battery pack out of the tool

handle. Insert it into the charger as described in the charger

section of thismanual.

Loading ...

Dewalt DCF888D2 20V MAX XR Brushless Cordless Impact Driver

Instruction Manual - Page 12