Loading ...
Loading ...
Loading ...
P/N YRD256-MNL-0003 Rev G
22
NOTE TO INSTALLER AND CONSUMER
While Yale® has included several features to prevent lockout (9-Volt battery jumper, low battery warnings),
it is still possible for a lockout situation to occur. Because this product does not have a mechanical
override (a key), Yale® recommends to use this product in an environment where there are additional entry
points into the dwelling.
FCC:
Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Ÿ Reorient or relocate the receiving antenna.
Ÿ Increase the separation between the equipment and receiver.
Ÿ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Ÿ Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this device, not expressly approved by Yale Home could void the user's authority to operate the equipment.
Industry Canada:
This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.
Cet appareillage numérique de la classe A répond à toutes les exigences de l'interférence canadienne causant des règlements d'équipement.
24/7 Product Support : 1-855-213-5841 • www.US.YaleHome.com
Yale® and Assure Lock® are registered trademarks of Yale Home. Other products' brand names may be trademarks or
registered trademarks of their respective owners and are mentioned for reference purposes only. © Copyright 2020.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Home is prohibited.
Yale Home
Resetting Lock to Factory Defaults
Reset
Button
Inside Lock
When lock is reset to factory defaults all Entry Codes
(including the Master Entry Code*) are deleted and all
programming features are reset to original default
settings (see below).
1. Remove battery cover and batteries.
2. Remove inside lock to access reset button.
3. Reset button (see image at right) is located beside
cable adapter.
4. While pressing reset button reinstall batteries. Hold
reset button a minimum of 3 seconds then release.
5. Replace battery cover.
After reset, Master Entry Code creation is the only
option available and must be performed prior to any
other programming of the lock.