Loading ...
Loading ...
Loading ...
5
B
A
D
C
1
2
A
B
Mounting (Rack)
Mounting (Tower)
2-Post (Telecom) Mounting
Mount 1U UPS models in 2-post racks with included hardware following the procedure below.
If you mount 2U UPS models in 2-post racks, they require the addition of a Tripp Lite 2-Post
Rack-mount Installation Kit (model: 2POSTRMKITWM, sold separately). See Installation Kit
owner’s manual for installation procedure for 2U UPS models.
1
Attach mounting ears
A
to the front mounting
holes of your equipment
B
using the screws
provided
C
. The ears should face backward.
2
Using an assistant if necessary, lift your
equipment and slide it onto the mounting
shelves. Attach your equipment to the rack by
passing the screws, nuts and washers provided
D
through its mounting ears and into the rack rails.
Mount all UPS models in an upright, tower position using included hardware. The user must
determine the fitness of hardware and procedures before mounting.
All UPS Models
Stand your UPS on its side with the LED/Control panel
at the top. Attach one rack mounting ear
A
to each
side of the UPS using included screws
B
. Attach the
rack mounting ears to the floor with user-supplied
hardware.
2U UPS Models Only
Rotate the LED/Control panel to view it easier while
the UPS is tower mounted. Insert a small screwdriver,
or other tool, in the slots on either side of the panel.
Pry the panel from the UPS, rotate the panel
accordingly, and push the panel back into the UPS.
17-06-249-932406.indb 5 6/20/2017 4:49:13 PM
Loading ...
Loading ...
Loading ...