Loading ...
Loading ...
Loading ...
Options
Hi Temp
Raises the main wash temperature
to improve cleaning. When used
with the Normal Wash cycle this will
provide a little extra tough cleaning
capability, but not as much as the
Pots Pans cycle.
Can be
selected with
SmartWasW _"E
Pots Pans
Normal Wash
What it does
Raises the main wash
temperature from 105°F
(41°C)to 120°F (49°C).
Added time to cycle
Typical Max
22 37
Added
Water t
Gallons
(Liters)
Sani Rinse
This high temperature option
sanitizes your dishes and glassware
in accordance with National
Sanitation Foundation (NSF)/ANSI
Standard 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for
licensed food establishments. The
green sanitized light indicates that
the Sani Rinse option was
successfully completed.
SmartWasW _"_
Pots Pans
Normal Wash
Increases the main
wash temperature from
105°F (41°C) to 120°F
(49°C) and the final
rinse from 140°F (60°C)
to 155°F (68°C).
37 57
Heated Dry
Turns the heat element on after the
wash cycle is completed. Use rinse
aid with or without the Heated Dry
option for best drying results.
Plastic items are less likely to
deform when loaded in the top dish
rack.
Available with
any cycle
except
Quick Rinse
Turns the heat element
on at the end of the
wash cycle.
26 32 0
tThe maximum additional water used for any combination of options is 2.1 gal. (7.9 L).
Delay Hours
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during
off-peak hours when possible.
To delay the start
1. Select a wash cycle and options.
2. Press the delay button to choose the number of hours to be delayed.
3. Press START/RESUME and firmly close the door within 3 seconds. The dishwasher starts in the selected number of
hours.
NOTE: Anytime the door is opened (such as, to add a dish), the START/RESUME button must be pressed again, within
3 seconds of closing the door, to resume the delay countdown.
Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When LOCK ON is lit, all
buttons are disabled. The dishwasher door can still be opened/closed while the controls are locked.
To turn on the Lock
Press and hold HEATED DRY for 3 seconds. LOCK ON will light up. If you press any pad while your dishwasher is
locked, the light flashes 3 times.
NOTE: The dishwasher cannot run if the control is locked.
To turn off the Lock
Press and hold HEATED DRY for 3 seconds. The light turns off.
16
Loading ...
Loading ...
Loading ...