Kenmore 66517519200 Official Dishwasher

User Manual - Page 14

For 66517519200.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Use this rinse cycle _
for rinsing dishes,
glasses, and
silverware that will Do not use
not be washed right detergent with this
away. cycle.
Soil Wash Rinse Main Rinse Final Dry Time Water
Level Wash Heated (rain) Usage
Sensed Rinse (gal/L)
Light 10 1.8-2.1/
6.8-7,9
* Cycle time includes dry time. An asterisk ( * ) by the cycle time
indicates the cycle time might be longer depending on the
temperature of the water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot
enough, the cycle time will be as shown.
Anytime during a cycle, press
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. Close the door.
4. Press a new cycle and/or options.
5. Press START.
£ddi sc >©umg s Cyc®
You can add an item anytime before the main wash starts. Open
the cloor and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1. Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. Close the door firmly until it latches. The dishwasher resumes
the cycle after about a 5-second pause.
CANCEL/DRAIN glows. The dishwasher starts a 2-minute drain (if
needed). Let the dishwasher drain completely. The light goes off
when the dishwasher finishes the drain.
To stop the drain
You can press Cancel/Drain again to stop the drain immediately.
Remember to drain the dishwasher before starting a new cycle.
To clear the indicators
Press Cancel/Drain before starting the dishwasher to clear all
options and cycles.
During the first minute of a cycle
1. Press a new cycle and/or options.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
After the first minute of a cycle
1. Press
0
}'N
CANCEL!DRAIN glows. Your dishwasher starts a 2-minute
drain (if needed). Let the dishwasher drain completely.
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off.
Select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
Press START to use the same cycle and option(s) as the previous
wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when
you press Start, the dishwasher runs the last full wash cycle and
options.
Hi Temp Scrub
Select this option to heat the water during parts of the cycle. Hi
Temp Scrub heats the water to 145°F (63°C)in the main wash.
Heating the water helps improve washing results. Hi Temp Scrub
is useful when loads contain baked-on food.
This option adds heat, water and wash time to the cycle.
q
NOTE: Hi Temp Scrub is an option with Pots Pans and Normal
Wash.
Sani Rinse
Select this option to raise the water temperature in the final rinse
to approximately 160°F (71°C). Sani Rinse adds heat and time to
the cycle. This high temperature rinse sanitizes your dishes and
glassware in accordance with NSF Standard 184 for Residential
Dishwashers. Certified residential dishwashers are not intended
for licensed food establishments.
o
R/S
NOTE: The Anti Bacterial cycle automatically uses this option.
Sani Rinse is an option with SmartWash, Pots Pans, and Normal
Wash. Only these sanitization cycles have been designed to meet
the NSF requirements.
14
Loading ...
Loading ...
Loading ...