Loading ...
Loading ...
Loading ...
Use To
Auto Color Detect
Color Sensitivity
1–9
Area Sensitivity
1–9
Set the amount of color the printer can detect from the original document.
Note: This menu item is applicable only when Color is set to Auto.
Allow color copies
On
Off
Enable color in copies.
Notes:
• On is the factory default setting.
• Setting this to Off hides all color‑specific menus.
• This setting overrides the Color setting.
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Specify whether an original document is two‑sided or one‑sided, and then specify
whether the copy should be two‑sided or one‑sided.
Note: 1 sided to 1 sided is the factory default setting. This setting is selected when
using a one-sided original document for a one-sided copy job.
Paper Saver
Off
2 on 1 Portrait
2 on 1Landscape
4 on 1 Portrait
4 on 1Landscape
Copy two or four sheets of a document on one page.
Note: Off is the factory default setting.
Print Page Borders
On
Off
Specify whether a border is printed.
Note: Off is the factory default setting.
Collate
On [1,2,1,2,1,2]
Off [1,1,1,2,2,2]
Stack the pages of a print job in sequence when printing multiple copies.
Note: (1,2,3) (1,2,3) is the factory default setting.
Punch
Off
2 holes
3 holes
4 holes
Specify the type of hole punch finishing to be used.
Notes:
• Off is the factory default setting.
• This menu item appears only when a staple, hole punch finisher is installed.
Staple
Off
On
Enable the staple finisher.
Notes:
• Off is the factory default setting.
• This menu item appears only when a staple finisher is installed.
Understanding the printer menus 169
Loading ...
Loading ...
Loading ...