Loading ...
Loading ...
Loading ...
• Attach the blower nozzle to the tube until the
tab (B) goes into the hole (A). Make sure that
the blower nozzle and the tube are locked
together.
A
B
To attach the scraper tool
The scraper tool can be used to loosen leaves
and other unwanted material for easier cleaning.
• Attach the scraper tool to the blower nozzle
until the tab (A) goes into the hole (B). Make
sure that the scraper tool and the tube are
locked together.
B
A
To install the battery charger on the
wall
CAUTION: Do not use an electric
screwdriver to install the battery
charger to the wall. An electric
screwdriver can cause damage to the
battery charger.
1. Install the battery charger on the wall with
the 2 screws (A). Use wall plugs (B) if it is
necessary.
B
C
D
A
A
2. Install the 2 screw hole plugs (C).
3. Connect the power cord (D) to the battery
charger and a mains socket.
Operation
Introduction
WARNING: Read and understand
the safety chapter before you use the
product.
To do a function check before you use
the product
1. Do a check of the air inlet for dirt and cracks.
Use a brush and clean off grass and leaves
from the product.
2. Make sure that the product works correctly.
3. Do a check of all nuts and screws and make
sure that they are tight.
To connect the battery charger
WARNING: Only use the battery
charger in ambient temperatures
between 41°F (5°C) and 104°F (40°C).
1516 - 006 - 24.08.2023
11
Loading ...
Loading ...
Loading ...