Loading ...
Loading ...
Loading ...
82
LATCH/UAS (Rear-Facing and Forward-Facing)
Installing LATCH/UAS
8. The vehicle lower anchors must be
as tight as possible. Using your full
weight, push the Base rmly into the
vehicle seat as you tighten the lower
anchors.
9. Tension LATCH/UAS Strap by
pulling on loop until snug.
10. After tightening LATCH/UAS, secure
excess strap under the LockStrong.
11. Apply pressure to fully close the
LockStrong. The lock indicator will
turn GREEN when fully closed.
NOTE: If belt tensioner does not fully
close (lock indicator still RED), open
the LockStrong and try loosening the
LATCH/UAS strap slightly.
2
Tighten
Aprete
1
4
Instalación con conectores inferiores
Lower Connector Installation
Open
Abre
Close
Cierre
Attach
Acople
25809061
10/20
3
Vehicle Belt Installation
Instalación con cinturón del vehículo
Open
Abre
Route
Ruta
Close
and lock
3
Or
O
4
2
1
Tighten
lap belt
Cinturón para
regazo
Tighten lap/
shoulder belt
Apreta cinturón
para regazo y
hombro
25809059 10/20
Cierre y
bloquear
Loading ...
Loading ...
Loading ...