Ancona AN-1407 User Manual

Loading ...

— 12 —

STEP 6

Preparations

NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.

NOTE: Use threaded drywall anchors only when mounting the hood on sheet rock. Mounting the hood on wall studs

or lumbers is highly recommended.

• Determine and mark the centre line on the ceiling where the range hood will be installed. A distance of 24 inches to 30

inches from the stove top is recommended, with a minimum of 30 inches for gas stove tops.

• Make sure there is proper clearance within the ceiling for exhaust vent.

• Duetotheweightandsizeofthisunit,pleasemakesurethatthesupportsystemorframeworkbeingusedisstableand

secure in the ceiling.

• Put a thick, protective covering over counter top, cook top or range to protect from damage or dirt.

• Removeanyhazardousobjectsaroundtheareawheninstalling.

CAUTION

If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the main

electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

Figure 1 Figure 2

Installation

8-M4 × 10

STEP 7

Installing the hood mounting bracket

• Using measurements from page 8, dene the installation location.

• Fix the hanging scaffold at desired position, and check rmness of

installation (see Figure 1).

• Adjust to proper height and attach the brackets to the hanging

scaffold (see Figure 2).

8 Ø 1 cm (0.4 in.)

Depth 6.5 cm (2.55 in.)

23.4 cm (9.2 in.)

Ø 19 cm

(7.5 in.)

Hole

21 cm

(8.2 in.)

21 cm (8.2 in.)

23.4 cm

(9.2 in.)

Bracket

Hanging scaffold

Loading ...

Ancona AN-1407 IRB636 36 in. Island Range Hood in Stainless Steel