Tripp Lite B127P-100-H-SR Owner's Manual

Loading ...

Extender/Splitter Daisy-Chain

Installation

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the HDMI source to the INPUT

port on the B127P-004-H unit.

3. Using a 6 ft./1.83 m HDMI 2.0 cable (such as Tripp Lite

P569-006-CERT or P568-006-2A cables), connect the LOCAL port on

the B127P-004-H to the INPUT port on a second B127P-004-H unit.

4. Repeat step 3 if connecting a third B127P-004-H unit.

Note: Only three levels of splitters can be cascaded.

5. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a local

monitor to the LOCAL HDMI port of the last B127P-004-H unit in the

installation.

6. Using Cat6 cable, connect one of the RJ45 output ports on the

local transmitter units to the RJ45 input port on a B127P-100-H or

B127P-100-H-SR remote receiver unit.

7. Repeat step 6 for each additional remote unit being connected.

8. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the B127P-100-H or

B127P-100-H-SR to a display.

9. Repeat step 8 for each additional monitor you are connecting to a

remote receiver unit.

10. Turn on the power to all your connected displays.

11. Connect the external power supply to the local transmitter unit and

plug it into an available wall outlet or (optional) a Tripp Lite Surge

Protector, Power Distribution Unit (PDU) or Uninterruptible Power

Supply (UPS). The POWER (green) LED will illuminate to indicate the

unit is receiving power from the external power supply.

Loading ...

Tripp Lite B127P-100-H-SR HDMI over Cat6 Passive Remote Receiver