Hikvision DS-2DE5225W-AE3 User Manual

Loading ...

Steps

Go to Conguraon → PTZ → Priorize PTZ .

Set the priority signal and delayed me.

Network

The network signal controls the device with priority.

RS-485

The RS-485 signal controls the device with priority.

Delay

It refers to the me interval of PTZ operaon controlled by dierent signals. When the

operaon with high priority is nished, the low priority signal controls the device aer the

seng interval.

Click Save.

4.13 Set Rapid Focus

Rapid focus is a funcon to reduce me of focusing comparing with that of normal focusing. To use

the funcon, calibraon should be done rst. Rapid focus may not be supported by certain device

models.

Steps

Go to Conguraon → PTZ → Rapid Focus .

Add scenes for calibraon.

1) Adjust the live image to a desired scene via PTZ control buons, and click Add.

2) Set the Rate and the Calibraon Point Amount of the added scene.

Note

More calibraon points may increase calibraon accuracy, but more focusing me is required.

The default amount is recommended.

Select the scene to display the calibraon line.

A red line displays on live image.

Adjust the length and posion of the line by dragging its two endpoints.

Note

The red line is recommended to stay in the center of the scene and to cover ground at the same

me.

Double click the image to enter full screen mode.

Click Start Calibraon.

Calibraon status displays on the live image.

Repeat to add other scenes and complete the calibraon.

Check Enable Height Compensaon if the mounng height of the device is lower than 3 meters.

Check Enable aer successful calibraon.

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DE5225W-AE3 AcuSense 2MP PTZ Network Dome Camera