Loading ...
Loading ...
Loading ...
Options User Settings
Door Alarm
The Door Alarm feature sounds an audible alarm every few
seconds when the either refrigerator door has been left open for
3 continuous minutes. The alarm will sound until the door is
closed or Door Alarm is turned off.
1=
2.
On the main menu, press the touch pad next to "Options."
Press the touch pad next to "Door Alarm Is On" to switch
between ON and OFE Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.
Humidity Control (on some models)
The humidity control feature turns on a heater to help reduce
moisture on the door hinge seal. Use in humid environments or
when you notice moisture on the door hinge seal. The refrigerator
uses more energy when Humidity Control is on.
1. On the main menu, press the touch pad next to "Options."
2. Press the touch pad next to "Humid Ctrl Is On" to switch
between ON and OFE Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.
Vacation Mode
The vacation mode feature decreases the number of automatic
defrost cycles. Once set, vacation mode will remain on until a
door is opened or the feature is turned off on the control panel.
NOTE: Door openings are ignored for the first hour after Vacation
mode is activated.
1. On the main menu, press the touch pad next to "Options."
2. In each of the following screens, continue to press the touch
pad next to "More Options" until "Vac. Mode is Off" appears
on the display.
3. Press the touch pad next to "Vac. Mode is Off" to switch
between ON and OFE Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.
Max Cool
The Max Cool feature assists with periods of high refrigerator or
freezer use, full grocery loads, or temporarily warm room
temperatures by lowering the freezer and refrigerator to the
minimum temperatures.
1. On the main menu, press the touch pad next to "Options."
2. In each of the following screens, continue to press the touch
pad next to "More Options" until "Max Cool is Off" appears on
the display.
3. Press the touch pad next to "Max Cool is Off" to switch
between ON and OFE Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.
NOTE: The Max Cool feature will automatically shut off in
approximately 2 hours.
Temp Alarm
The Temp Alarm feature alerts you if the temperature exceeds
normal operating temperatures, for an hour or longer, in either or
both the refrigerator and freezer compartments. An audible alarm
will sound repeatedly, and the highest temperature reached in
each compartment will be displayed.
NOTE: Touch any pad on the control panel to turn off the audible
alarm. Temp Alarm will automatically reset once the warm
condition has been corrected for 30 minutes.
1. On the main menu, press the touch pad next to "Options."
2. In each of the following screens, continue to press the touch
pad next to "More Options" until "Temp Alarm Is Off" appears
on the display.
3. Press the touch pad next to "Temp Alarm Is Off" to switch
between ON and OFE Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.
Replace H20 Filter
See "Water Filtration System."
The control center allows you to set user preferences if desired.
Language
The language preference allows you to change the control panel
display to English, French or Spanish.
1. On the main menu, press the touch pad next to "User
Settings."
2. Press the touch pad next to "Select Language."
3. Press the touch pad next to either "Mettre En Fran£_ais" or
"Cambiar En Espar_ol." Press the touch pad next to "Confirm"
to lock in the setting and return to the main menu.
Temperature Display
The temperature display preference allows you to change the
control panel display from degrees Fahrenheit to degrees Celsius.
1. On the main menu, press the touch pad next to "User
Settings."
2. Press the touch pad next to "Fahrenheit Is On" to switch
between Fahrenheit and Celsius. Press the touch pad next to
"Done" to lock in the desired setting and return to the main
menu.
Display Brightness
The Display Brightness preference adjusts the backlight level of
the control panel.
1. On the main menu, press the touch pad next to "User
Settings."
2. In each of the following screens, continue to press the touch
pad next to "More Settings" until "Display Brightness"
appears on the display.
3. Press the touch pad next to "Lighter" or "Darker" to adjust the
setting between 1 (darkest) and 5 (lightest). Press the touch
pad next to "Done" to lock in the desired setting and return to
the main menu.
Adjust Light Sensor
The "Adjust LiteSensor" preference allows you to adjust the level
at which the Light Sensor will detect darkness and activate the
Auto On mode for the dispenser light.
1. On the main menu, press the touch pad next to "User
Settings."
2. In each of the following screens, continue to press the touch
pad next to "More Settings" until "Adjust LiteSensor" appears
on the display.
3. Press the touch pad next to "Lighter" or "Darker" to adjust the
setting between 1 (darkest) and 9 (lightest). Press the touch
pad next to "Done" to lock in the desired setting.
Alarm Sound
The alarm sound preference allows you to turn off any audible
alarms (door open, too warm, etc.) when quick and simple
remedies are not possible. It will not disable alarm features or
visual displays.
1. On the main menu, press the touch pad next to "User
Settings."
2. In each of the following screens, continue to press the touch
pad next to "More Settings" until "Alrm Sound Is On" appears
on the display.
3. Press the touch pad next to "Alrm Sound Is On" to switch
between ON and OFE Press the touch pad next to "Done" to
lock in the desired setting and return to the main menu.
10
Loading ...
Loading ...
Loading ...