Loading ...
Loading ...
Loading ...
Pre-Collision Braking System
29
Pre-Collision Braking System
When there is a risk of a collision with an identified object in front (a vehicle, pedestrian,
cyclist, etc.), the EyeSight system helps to prevent or minimize a collision by warning the
driver. If the driver still does not take evasive action to avoid a collision, the brakes can be
automatically applied just before the collision in order to reduce impact damage, or if possi-
ble, prevent the collision. If the driver takes evasive action to avoid a collision, Pre-Collision
Braking Assist will operate in order to help the driver to prevent or minimize the collision.
This system can be effective with direct rear-end collisions. In addition to rear-end colli-
sions, this system can be effective for avoiding collisions with crossing pedestrians and
cyclists and with pedestrians and oncoming vehicles when turning. This function can be
activated when the select lever is in the “D”, “M” or “N” position.
About identified objects for Pre-Collision Braking System
EyeSight recognizes the following objects as identified objects for Pre-Collision Braking
System. (Identified objects differ depending on the function.)
• Vehicles
• Pedestrians
• Cyclists
Continued on next page
WARNING
Pre-Collision Braking System operation
• Never use Pre-Collision Braking System and Pre-Collision Braking Assist to
stop your car or avoid a collision under ordinary conditions. These functions
cannot prevent collisions under all conditions. If the driver relies only on Pre-
Collision Braking System for Brake operation, collisions may occur.
• When a warning is activated, pay attention to the front of the vehicle and its
surroundings, and operate the brake pedal and/or take other actions if neces-
sary.
• The Pre-Collision Braking System recognizes vehicles, pedestrians and
cyclists as identified objects. The system is intended to avoid or reduce the
severity of collisions, but the system may not be able to recognize objects
under certain conditions*. For example, when a vehicle is viewed from the
side, oncoming vehicle, vehicles approaching in reverse, motorcycles, small
animals or children, or walls or doors are not likely to be detected.
• Pre-Collision Braking System will operate at the point when it determines that
a collision cannot be avoided and is designed to apply strong braking force
just before a collision. The result of this varies depending on a variety of con-
ditions*. Because of this, performance of this function will not always be the
same.
B2632BE-A.book 29 ページ ２０２２年１２月２３日 金曜日 午前９時１１分
Loading ...
Loading ...
Loading ...