INSTALLATION GUIDE
Professional handles
FITTING HANDLE TO PANEL
431159A 10.22 US CA
Custom panel installations:
Mark the handle location on the
panel. Ensure distance between
holes is 432mm.
1
SAFETY & WARNINGS
2
Custom panel installations:
Drill the holes using a 7mm drill
bit. Counterbore from the rear.
Secure handle by loosely
tightening the screws using
a crosshead driver. Do not
overtighten.
Custom and Dishwasher panels:
Countersunk screw
DishDrawer panels:
Pan head screw
4
5
Use a level to confirm the handle
is aligned. Tighten using the
supplied hex key.
For more information, visit www.fisherpaykel.com
!
WARNING!
Cut Hazard
Failure to use caution could result in injury.
• Take care: some edges may be sharp.
z
For products that are not front-mounted, installation
must be carried out by a Fisher & Paykel trained and
supported service technician.
z
Ensure all packaging is removed and disposed
of responsibly.
z
Installation of this product requires basic
mechanical skills.
z
Ensure product is installed with the correct tools to
avoid personal injury or damage to the appliance.
z
Take care not to scratch the door with the supplied
Hex key when tightening the screws.
5mm hex key (1)
M6x25mm countersunk
screw (2)
Handle (1)
Crosshead driverPowered driver
Tape measure
M6x25mm pan head
screw (2)
Level
432mm
COMPONENTS REQUIRED
Supplied
Not supplied
Align handle to the holes.
3
