Loading ...
Loading ...
Loading ...
Fills with the Wrong Temperature Water
• Turn both faucets on fully,
• Make sure temperature selection is correct,
• If Auto Temperature Control is selected, cold water may feel warmer than cold water from the tap tsee page 3),
• Make sure hoses are connected to correct faucets and inlet connections, Be sure water supply is regulated correctly.
Flush water line before filling washer,
• Check the water heater, It should be set to deliver a mminmm 120 ° F (49 ° C) hot water at the tap, Also check water
heater capacity and recovery rate,
• Discolmect hoses and clean screens, Hose filter screens may be plugged.
• To obtain the energy savings, warm water fills are lukewarm,
• To save energy, this washer will regulate wash water temperatures by mixing hot and cold water to reach the prop-
er water temperature,
10
Loading ...
Loading ...
Loading ...