Loading ...
Loading ...
Loading ...
14
Troubleshooting
Caution! Before troubleshooting, disconnect the power supply. Only a qualified electrician or competent person must
do the troubleshooting that is not in this manual.
Important! There will be some sound/noise during normal operation (compressor or refrigerant circulation).
PROBLEM
POSSIBLE CAUSE
SOLUTION
The appliance does
not work
The main plug is not plugged in
or is loose
Insert the main plug
The fuse has blown or is
defective
Check fuse, replace if necessary
The electrical socket is defective
Electrical malfunctions are to be
corrected by an electrician.
Appliance freezes or
cools too much
The temperature is set too low,
or the appliance is running at
SUPER
modes
Turn the temperature regulator to a
warmer setting temporarily.
The food is not frozen
enough
The temperature is not properly
adjusted
.
Check the initial temperature setting
section.
The door was open for an
extended period
Open the door only as necessary.
A large quantity of warm food
was placed in the appliance
within the last 24 hours
Temporarily turn the temperature
down.
The appliance is near a heat
source
Look at the installation location
sector of this user manual.
Heavy amount of
buildup of frost on the
door seal
The door seal is not airtight
Carefully warm the leaking section
of the door seal with a hair dryer (on
a cool setting). At the same time
shape the warm door seal by hand
so that it sets correctly.
Unusual noises
The appliance is not leveled
Readjust the leveling feet.
The appliance is not touching
the wall or other objects.
Move the appliance slightly.
A component e.g., a pipe, on the
rear of the appliance is touching
another part of the appliance or
wall
.
If necessary, carefully bend the
component out of the way.
If your appliance shows other symptoms than those described above, or if you have checked all items listed as the
cause and the problem still exists, then call SUMMIT® Customer Service at 1-800-932-4267.
Loading ...
Loading ...