Loading ...
Loading ...
Loading ...
AIR CONDITIONER FEATURES
TO SELECT THE OPERATING MODE:
To choose operating mode, press Mode button. Each
time you press the button, a mode is selected in a
sequence that goes from Auto, Cool, Dry and Fan. The
indicator light beside will be illuminated and remained
on once the mode is selected.
To operate on Auto feature:
In this mode, the fan speed cannot be adjusted: it starts
automatically at a predetermined speed that depends on
the room temperature.
To operate on Fan Only:
Use this function only when cooling is not desired, such
as for room air circulation or to exhaust stale air (on
some models). Remember to open the vent during this
function, but keep it closed during cooling for maximum
cooling efficiency. You can choose any fan speed you
prefer.
During this function, the display will show the actual
room temperature, not the set temperature as in the
cooling mode.
To operate on Dry mode:
In this mode, the air conditioner will generally operate
in the form of a dehumidifier. Since the conditioned
space is a closed or sealed area, some degree of
cooling will continue.
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating (not available on cooling-
only models), or fan-only operation depending on what
temperature you have selected and the room temperature.
The air conditioner will control the room temperature
automatically at the temperature point you have selected.
In Fan-only mode the temperature is not adjusted.
The unit will initiate automatically the Energy Saver
function under Cool, Dry, Auto (only Auto-Cooling and
Auto-Fan) modes.
When the unit is on or off, first press Timer button: the
TIMER ON indicator light illuminates. It indicates the Auto
Start program is initiated.
When the time of TIMER ON is displayed, press the Timer
button again, the TIMER OFF indicator light illuminates.
It indicates the Auto Stop program is initiated.
Press or hold the UP or DOWN button to change the Auto
time in 0.5 hour increments, up to 10 hours, then in 1 hour
increments up to 24 hours.The control will count down the
time remaining until start.
The selected time will register in 5 seconds, and the system
will automatically revert back to display the previous
tem
perature setting or room temperature when the unit is
on. When the unit is
off there is no display.
Turning the unit ON or OFF at any time or adjusting the
timer setting to 0.0 will cancel the Auto Start/Stop timer
program.
TIMER
-
AUTO START/STOP FEATURE:
Displays
DISPLAYS:
O O
Shows the set temperature in " C" or " F" and the
Auto-timer settings. While on Fan-only mode, it shows
the room temperature.
DISPLAYS:
-Evaporator temperature sensor error. Unplug the
unit and plug it back in. If error repeats, call for
service.
NOTE: " " is displayed as shown in the left picture.
HS -Electric heating sensor error. Unplug the unit and
plug it back in. If error repeats, call for service.
Error codes:
AS-Room temperature sensor error. Unplug the unit
and plug it back in. If error repeats, call for service.
NOTE: In Fan-only mode, it will display" LO" or " HI" .
If the unit stops unexpectedly due to a power outage,
it will restart with the previous function setting
automatically when the power resumes.
NOTE:
Loading ...
Loading ...
Loading ...