Loading ...
Loading ...
Loading ...
7
Installing your new appliance
Before using the appliance for the first time,
you should be informed of the following tips.
Warning!
For proper installation, this freezer must be
placed on a level surface of hard material
that is the same height as the rest of the
flooring. This surface should be strong
enough to support a fully loaded freezer.
The rollers, which are not castors, should
be only used for forward or backward
movement. Moving the freezer sideways
may damage your floor and the rollers.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat. For
this reason, sufficient clear space should
be available around the freezer.
Suggest: It is advisable for there to be
50-75mm of space from the back to the
wall, at least 100mm from its top, at least
50mm from its side to the wall and a clear
space in front to allow the doors to open
130°. As shown in follow diagrams.
Note:
This appliance performs well within the
climate class from SN to T showed in the
table below. It may not work properly if
being left at a temperature above or below
the indicated range for a long period.
Climate class
Ambient temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
Loading ...
Loading ...
Loading ...