Loading ...
Loading ...
Loading ...
10 INSTALLATION
10.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
10.2 ASSEMBLE AS A BLOWER
1. Move the blower tube (4) forward until the notched
area (12) clicks into the slot (13).
2. Put the concentrator nozzle (5) into the blower tube
to lock.
5
4
13
12
NOTE
You can use the concentrator nozzle to increase
airflow in tight areas: flower beds, under decks, etc.
10.3 ASSEMBLE AS A VAC
WARNING
Make sure that the machine is in the OFF position,
and the impellers stop before you attach or remove
tubes.
1. Move the front and rear vac tubes together until the
lock button engages.
2. Clamp the auxiliary handle into the corresponding
round hole of the upper straw and make the
hexagonal bolt through the round hole on one side
of the handle, and lock it with the auxiliary handle
knob. The knob can be loosened and the auxiliary
handle can be adjusted to a suitable angle for the
user, and then tighten the knob.
7
English
EN
Loading ...
Loading ...
Loading ...