PHBT6 with the latest technology is a stereo Bluetooth headphone with high
sensitive touch control panel. It supports the following profiles:
*HSP - Headset profile
*HFP - Hands-free profile
*A2DP - Advanced audio distribution profile
*AVRCP - Audio / video remote control profile
Overview
1) MFB (Multifunction button):
Switch on / off, pairing,
make /answer / end/ reject call.
2) Micro USB charging port
3) Built-in microphone
4) Touch panel: volume up / down,
last / next tracking, play / pause,
Charging the battery
When the headset is nearly exhausted, the Led flashes in red and “ beep” sound is
heard. You will need to charge it according to the following two steps.
Step 1: Plug the USB charging cable into USB port of PC.
Step 2: Connect charging cable with the micro USB charge port of the headset.
Note:
1) Before using this headset for the first time, please charge the battery fully.
2) It takes about 3 hours for a full charge of the headset.
3) The LED keeps in red when the headset is charging and will turn off when fully
charged.
Switch on / off the headset
1)To switch on the headset
Press and hold the MFB button (1) for 2 seconds and the LED (5) flashes in red.
Afterwards the LED flashes in red and blue alternatively, the headset enters into
pairing mode automatically.
2)To switch off the headset
Press and hold the MFB button (1) for 6 seconds until the LED flashes red and a
“beep” sound is heard.
Pairing the headset with your phone
1) Ensure the headset is turned off.
2) Place the headset and the mobile phone where they are easily viewable and no
more than one meter apart.
3) Press and hold the MFB for 3 seconds until the LED quick flashes blue and red
alternatively, and a "beep” is heard.
3) Activate your mobile phones’ Bluetooth function; please refer to your mobile
phone user guide for details.
4) Set the mobile phone to search for Bluetooth devices within range and select
“ PHBT6” from the list of devices shown.
5) Enter pass code "0000" and press "OK" to pair your headset
with mobile phone, when the pairing is completed, the LED will
flash blue regularly and the headset in standby mode.
6) Go back to your mobile phone’s main menu.
Note:
1) The pairing mode will last for 5 minutes. If the pairing failed, the headset will
automatically turn off.
2) After the initial connection, each time the headset is turned on it will seek the last
device it was connected to. If the device is turned on and in range, it will connect
automatically.
3) The battery meter will display automatically at the status bar of iPhone, iPad and
iPod once it is connected successfully. The headset will automatically power off if no
paired device is in range for 5 minutes.
Wearing the headset
The headband of the headset is retractable. Please adjust the headset according to
the actual use. Mark “ L” of headset represents left ear. Mark “R” represents right ear.
Please wear the headset according to the indication of the marks.
Playing music
Thanks to the sensitive touch panel (4) on the right side of PHBT6, it is possible to
play/stop, control the music selection on your device, and adjust the volume as well,
simply by touch.
1) To play / stop music, tap the middle area of the touch panel once.
2) Slide your finger vertically on the touch panel (4) to adjust the volume of your
music or the caller voice. You will hear a “beep” when the volume reaches to its
maximum / minimum.
3) Sliding your finger horizontally on the touch sensitive control panel to play the
next track or return to the previous one.
4) It is even possible to use the control of all the functions previously explained
through the paired device, if supported.
5) While you are listening to the music the LED (2) keeps blue.
Warning:
Before using the headset to play music without wearing it to be sure that the volume
is not too loud, in order to avoid ear damage.
Make and receive calls
Thanks to the internal microphone (3), if PHBT6 is paired to a mobile phone, it is
possible to make and receive calls.
1) Answer a call.
When a call is coming, the LED flashes blue and “beep” sound heard. To answer a call,
press briefly the MFB button (1).
2) End a call.
To end a call, press briefly the MFB button (1) during the call.
3) Reject an incoming call.
To reject an incoming call hold the MFB button (1) for 3 seconds until you hear a long
tone, then release the MFB button. The incoming call is rejected.
4) Activate voice dialing / voiceover / Siri.
If your phone supports voice dialing / voiceover / Siri you can activate it when no call
is in progress.
To activate voice dialing / voiceover / Siri hold button (1) for 3 seconds until you
hear a tone from the PHBT6; When you hear the second tone you can say the
command.
5) Call the last selected number.
Press twice (double click) the MFB button (1).
6) Transferring a Call
While speaking, press and hold the MFB button (1) for 3 seconds to transfer a call
from your headset to your mobile phone (Please check if your mobile phone has this
function), repeat the above procedure to transfer the call from your mobile phone to
your headset.
Note:
1） If the paired device supports it, you can perform all the functions described in
this chapter while you are listening to the music.
2） The LED flashes blue during the call.
3） You can move your finger on the touch panel (4) upward or downward to adjust
the volume during the call.
Specifications
Bluetooth version: 4.0
Frequency: 2.4GHz
Audio impedance: 32 Ohm
Battery life: 10-13 hours (Music Play Time)
15-20 hours (Talk Time)
Battery duration on standby: 350 hours
Charging Time: about 3.0 hours
Charging: Micro USB
Operating range: 33' feet
Dimension: 7"x 6"x 1.1" inches
Weight: 5.2 ounces
Troubleshooting
If you are unable to connect your headset with your mobile phone, please try the
following:
*Ensure your headset is turned off and is properly charged.
*Ensure the headset is paired with your mobile phone.
*Ensure your mobile phone's Bluetooth feature is activated. Please refer to your
mobile phone user guide for specific instruction.
*Ensure the headset is within a 33' foot range of your mobile phone and there are no
obstructions, such as walls or other electronic devices in between.
If the above steps do not solve your problem, please recharge the headset and
remove your mobile phone battery for a short time.
Safety Information
-Avoid listening to the music at loud volume for a long time: risk of ear damage.
-Follow the local rules about mobile phones usage and their accessories while
driving.
-Keep PHBT6 out of the reach of small children to avoid choking hazard.
-Switch off PHBT6 before a flight. Do not use it on a plane if not permitted by the
airline.
-Keep PHBT6 dry and avoid humidity.
-Disconnect PHBT6 from charging cable before cleaning or polishing it.
-Do not use PHBT6 if it does get wet.
-Do not try to open, disassemble or overcharging the lithium-ion battery of PHBT6 :
danger of explosion.
-At the end of battery lifecycle do not dispose it as household waste. Dispose of
batteries according to local regulations.
-Please recycle when possible.
