Loading ...
Loading ...
Loading ...
DARNING
Top thread tension
control 3 to 6
Presser foot
Stitch length
8 to 10
1
_ J
Stitch width 0 Stitch selector
Use Darning plate (See page 9)
Push down the outer ring of the pressure
regulator to release the pressure on the
presser foot, (See page 6)
Stretch fabric between embroidery hoops
with hole centered. Lower presser bar
and sew at a slow speed moving fabric
back and forth with a steady rhythm to
cover darning area, When it is covered,
turn fabric 1/4 a turn and sew layer of
stitching across first layer.
If fabric is thin or badly damaged in hole
area, you may want to put a separate
piece under the hole for reinforcement.
Be sure to return pressure on presser foot
to original adjustment after darning°
(See page 6)
34
Loading ...
Loading ...
Loading ...