Loading ...
Loading ...
Loading ...
31/
EN
PowerWash Function
(depends on model)
PowerWash impeller
located under the
lower impeller helps
washing your heavily
soiled dishes places
in the right side of the lower basket. It will
give better results to place the most soiled
dish to the right front side.
Do not try to remove the PowerWash
impeller!
Rapid Clean Function
(Depends on model)
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Super Gloss Function
(Depends on model)
It provides superior drying performance.
Half Load function
(Depends on model)
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key.
While the function is enabled, the Half Load
indicator will become on in the function
selection indicator and on the display.
4. Close the door of the machine to start
the programme.
With the Half Load function you can
save both water and power while using
the lower and upper baskets of the
machine.
Auto Tablet Feature
(Depends on model)
Auto Tablet is a feature which detects
the use of combined tablet detergents
automatically.
Drying performance of these type of
detergents is improved by adjusting
temperature and duration accordingly.
Owing to this feature, there is no need
to press any button in case of a tablet
detergent use.
Feature can be activated if automatic
detection is desired.
To activate / to deactivate:
1. After turning on the machine, press
Time Delay and P keys simultaneously.
Keep them pressed until the
countdown 3, 2, 1 is completed on the
display.
2. Press P key to activate the a: option.
Automatic detergent detection feature
is disabled at “a:0” option and enabled
at “a:1” option. Set the desired option
by pressing the Time Delay key.
3. Turn off the machine with On/Off key to
save the changes.
Changing Warning Sound Volume
1. After switching on your machine,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed
until the countdown 3, 2, 1 is
completed on the display.
2. Press P / P+ key to move to the S:
position on the display.
3. Each pressing on the Time Delay key
will change the warning sound volume
as "S:0" off, "S:1" medium and "S:2"
high.
4. Switch off the machine with the On/Off
key to save the changes.
Your machine is set to “S:2” as factory
default.
Loading ...
Loading ...
Loading ...