Kenmore 79036673400 Gas Range

Use & Care Guide - Page 23

For 79036673400. Also, The document are for others Kenmore models: 790.3667*

PDF File Manual, 60 pages, Read Online | Download pdf file

79036673400 photo
Loading ...
Loading ...
Loading ...
General Care & Cleaning (cont'd)
C_eaning the Burner Grates, Burner Caps, Burner Heads
Surface
Burner
Grate
The Burner Grates, Burner Caps, and Burner Heads shouUd be routineUy cUeaned,
Keeping the burner ports dean wHUprevent improper ignition and an uneven
flame at each burner position, Refer to the following instructions:
To Remove and Replace the Surface Burner Grate, Surface Burner Cap and
Surface Burner Head - Remove in the following order; (1st) Surface Burner
Grate, (2nd) Surface Burner Cap, (3rd) Surface Burner Head (See Figure 1),
Surface
Burner
Reverse the procedure above to repUacethe Surface Burner Cap, Surface
Burner Head and Surface Burner Grate, Do not remove any burner parts from
the cooktop until the burner parts have completely cooJed and are safe to
handte, Do not operate the surface burners without the Surface Burner
Caps, Surface Burner Heads and Surface Burner Grates properly in ptace,
Gas
Opening
Figure 1
To Clean the Burner Caps, Burner Heads and Grates - Use a soap=filled
scouring pad or a mild abrasive cleanser to clean the surface burner caps and
surface burner heads, The Grates and the outer vent covers are designed to be
Dishwasher safe for cleaning, The ports (or slots) around the burner heads must
be routinely cleaned, If residue still remains in these ports, use a smaIFgauge
wire or needle to clean the slots or holes, For proper flow of gas and ignition of
the burner--DO NOTALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY
OTHER MATERIAL TO ENTER THE GAS GAS OPENING. ALWAYS keep the
surface burner cap and surface burner head in place whenever a surface burner
is in use,
Surface Burner Surface Burner Surface Burner OuterVent
Grate Caps Heads Covers
THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop,
THE FIXED OVEN VENT IS NOT REMOVABLE. Do not attempt to remove the fixed oven vent
cover,
Use caution when replacing the burner cap so the electrode is not damaged, This may cause a delayed
ignition or prevent the burner from igniting,
Any additions, changes or conversions required in order for this appliance to perform satisfactorily must
be made by Sears Service, Call 1-800-4-MY-HOMEĀ® (See back cover),
23
Loading ...
Loading ...
Loading ...