Loading ...
Loading ...
Loading ...
OWNER’S MANUAL - CD-81Q, 101Q
9
INSTALLATION INSTRUCTIONS
9
or
First reconnect the coupler plugs, make the exhaust
control positioned through the front in the proper
location. Then replace the retaining screws that hold
the panel in place. Do not push or pull the from panel
louvers.
21. Install the R1 hardware
(Only applicable to Energy star models)
In order to minimize air leaks and ensure optimal
insulation, it is necessary to install the included R1
hardware to the plastic window panel. Follow the
instructions below.
Step 1. After the unit is installed to the window,
measure the inner height of the panel frame to the top
of the unit.
Step 2. Remark a line on the provided R1 hardware
according to the measure height in step 1, then cut the
R1 insulation panel along the line.
Step 3. Remove the tape of the R1 hardware, then
attach to the plastic window panel.
Loading ...
Loading ...
Loading ...