Loading ...
Loading ...
Loading ...
LCD can display meter readings such as Volts, Current, Watts, Frequency,
Power Factor, and VA.
2. To cycle through the various measurements press the UP and DOWN key
as desired. The measurement unit currently selected will be indicated in the
display.
3. Volts are displayed in Volts (true RMS), Current is displayed in Amps (true
RMS), Watts are displayed in active power Watts, VA is displayed in apparent
power VA (VA=Vrms*Arms), Frequency is displayed in Hertz (Hz), Power Fac-
tor (P.F.) is displayed as (Watts/Vrms*Arms).
Rate display:
1. To display the current programmed rate used in cost calculations, press the
MENU key until “Rate” is indicated in the display.
2. The current programmed rate is displayed in dollars and cents. For example a
programmed rate of 10.6 cents per KWH will be displayed as $0.106.
3. To change the programmed rate, please refer to the section on “Rate setting”.
Kilowatt-Hour display:
1. To display the total consumed power in Kilowatt-Hours, press the MENU key
until “KWH” is indicated in the display.
2. Consumption will be displayed in Kilowatt-Hours (from 0.01 KWH to 9999
KWH). As KWH accumulate, the decimal point in the display will shift to ac-
commodate a full reading.
3. To reset the accumulated KWH measurement, press and hold the RESET key
on the unit. After a few seconds, “rESt” will appear momentarily on the LCD.
Release the RESET key. This indicates that previous measurements have
been deleted and that the total accumulated KWH, Elapsed Time and Cost
measurements have been reset to zero.
Elapsed Time display:
1. To display the total elapsed time that the Kill A Watt™ EZ has been connected
to power since the last reset, press the MENU key until “Elapsed Time” is
indicated in the display.
2. Time will initially be displayed as Hours:Minutes (from 00:00) and then switch
to Hours only (to 9999) to accommodate a full reading.
3. To reset the elapsed time measurement, press and hold the RESET key on
the unit. After a few seconds, “rESt” will appear momentarily on the LCD.
Loading ...
Loading ...