Loading ...
Loading ...
Loading ...
CARE AND MAINTENANCE
56
© 2021 SAPPHIRE
SAPPHIRE Ice Machine Operator’s Manual
CLEANING THE UNIT’S INTERIOR
When necessary, defrost and thoroughly clean the inside of the unit with mild soap and water. Do not
use electrical heating devices or sharp or pointed tools when defrosting the unit.
When defrosting or leaving the unit turned off , leave the door open. Leaving the door open allows air
to dry the inside of the cabinet, reducing the chance for mildew and damage to the mold mechanism’s
components.
EXTENDED PERIODS OF NON-USE
!
WARNING
Electrical Shock Hazard
Always disconnect power at the source before working on the unit.
OTE: N Do not winterize this unit with ANY type of anti-freeze; damage to the mold coating will occur, invalidating product’s
Limited Warranty and creating potential health hazard.
1. Turn off the water at the main water source.
2. Disconnect the water supply line from the water inlet of the ice machine.
3. Turn off the electric supply at the main power source. Remove the power cord from the electrical
outlet.
4. Remove any remaining ice from the storage bin.
5. Press and hold the UP and DOWN buttons together for at least 3 seconds to open the drain valve,
or enter the service menu to open the drain valve and then drain all water in the water trough.
Press and hold the UP and DOWN buttons together for at least 3 seconds again or turn the unit
off to close the drain valve.
6. Leave the door open to allow for circulation and prevent mold and mildew.
7. Leave the water supply line disconnected and the power cord unplugged until ready to use.
NOTICE
Never pull on the power cord to unplugged the appliance form the electrical outlet. Grasp the plug
of the power cord and pull out fi rmly.
RECOMMISSIONING THE UNIT
1. Connect the water supply lines, turn on the water, check for leaks, and then restore power to
the unit.
2. Once water has fi lled the trough, ice making cycles will commence.
Loading ...
Loading ...
Loading ...