Loading ...
Loading ...
Loading ...
9 – English
OPERATION
HANGING THE PORTABLE FAN WITH THE
KEYHOLE MOUNT
See Figure 6, page 12.
NOTE: Be careful not to hang the fan in such a way that it
prevents normal fan operation or damages the cord.
Use a 6 mm minimum screw size for mounting the fan.
Ensure that the screw is securely fastened into a stud
and that the screw is exposed no more than 5/8 in.
Slide the keyhole hanger, located on the frame cross
member, over the screw. Make sure the fan is securely
mounted.
ADJUSTABLE HEAD
See Figure 6, page 12.
To change the angle of the fan head, loosen the adjustment
knob on each side of the fan head. Select the desired posi-
tion and tighten each knob to secure.
NOTICE:
Adjusting the fan head without loosening the adjustment
knobs could result in damage to the fan.
ADJUSTING THE MISTING ANGLE
See Figure 7, page 13.
The fan can be angled forward -15° or back 45° to adjust
the direction of the mist.
USING THE MISTING FAN WITH A GARDEN
HOSE (NOT INCLUDED)
See Figure 8, page 13.
WARNING:
Always route hoses away from traffic areas to prevent a
tripping hazard.
Choose a flat, steady surface, such as a concrete patio
or tabletop.
Set the fan switch to the OFF ( O ) position.
With the water faucet turned completely off, attach a
garden hose (not provided) securely to the garden hose
connector and hand tighten.
Install the battery pack and close the battery compartment.
Turn the garden hose faucet on all the way and allow the
hose to fill with water.
Rotate the water control valve on the garden hose
connector to the ON position.
Press the fan switch to LOW ( I ) or HIGH ( II ) position.
To move the fan to another location:
Set the fan switch to the OFF ( O ) position.
NOTE: The intake tube cannot be removed.
USING THE FAN WITHOUT MIST
If desired, this product may be used as a fan only, when not
connected to a water source. Always disconnect the garden
hose and place the misting tube in its storage area.
Loading ...
Loading ...
Loading ...