Loading ...
Loading ...
Loading ...
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection:
Recommended grounding method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an
extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the Temperature Control to the off
position as shown and then disconnect the refrigerator from the
electrical source.
<1
When you are finished, reconnect the refrigerator to the electrical
source and reset the Temperature Control to the desired setting.
TOOLS NEEDED: 1/4in., 1/2in., and _e in. hex-head socket
wrenches, a flat-head screwdriver, and Phillips screwdriver.
1. Apply firm pressure with your hand on the face of the trim.
Slide the top trim up and bottom trim down away from the
handle. Lift trim pieces off of the upper and lower shoulder
screws.
NOTE: Some models include accent pieces between the handle
and the handle trim. Ifyour model includes the accents, you will
need to carefully remove them with a flat-head screwdriver before
removing the handle screws. The accent pieces are optional and
can be reinstalled or left off of the handle assembly.
2. Remove handle screws and handle.
3. Replace handle as shown.
®
_ _ _ _, ,_ _ 8 _ •_
NOTE: Keep the two bolts that secured the refrigerator in the
shipping case. They are the front leveling legs.
Your refrigerator has 2 adjustable leveling legs. If your refrigerator
seems unsteady or you want the doors to close easier, adjust the
refrigerator's tilt using these instructions.
1. Screw the legs all the way into the bolt holes in the bottom
corners of the refrigerator.
2. Plug into a grounded 3 prong outlet.
3. Move the refrigerator into its final position.
4. Lower the front legs just enough to lift the cabinet up off of
the floor.
5. Adjust the legs to level the refrigerator:
• Turn the leveling leg to the right to lower that side of the
refrigerator.
• Turn the leveling leg to the left to raise that side of the
refrigerator.
6. Check with a level.
7. Open and close the door to make sure it swings properly.
Loading ...
Loading ...
Loading ...