12A-264A000 MTD lawn mower

User Manual - Page 12

For 12A-264A000.

PDF File Manual, 20 pages, Download pdf file

Loading ...
Loading ...
Loading ...
ControlsandFeatures
4
Control
Drive Control
Recoil Starter
Mulching ................
Bame
Cutting Height
Adjustment Levers
Figure 4-1
J
8lade Control
RecoUStarter
The blade control is attached to the upper handle of the mower.
Depress and squeeze it against the upper handle to operate the
unit. Release it to stop engine and blade.
_ ARNING: This blade control is a safety device.
Never attempt to bypass its operations.
DriveControl
The drive control is located on the underside of the upper handle
and is used to engage the drive. Squeeze it against the upper
handle to engage the drive; release it to slow down or stop
mower from propelling. See Fig. 4-1.
CuttingHeightAdjustmentLevers
One adjustment lever is located on each wheel and is used to
adjust the cutting height. All four levers have to be at the same
relative position to ensure a uniform cut.
The recoil starter is attached to the right upper handle. Stand
behind the unit and pull the recoil starter rope to start the unit.
MulchingBaffle
The mulching baffle is used for mulching purposes. Instead
of discharging grass to the side, your mower has the option
of recirculating the clippings back to the lawn. Remove grass
catcher (if applicable), and operate with the mulching baffle only
for this purpose.
_lb ARNING: Keep hands and feet away from the
chute area on cutting deck. Refer to warning label
on the unit.
Loading ...
Loading ...
Loading ...