Loading ...
Loading ...
Loading ...
5
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
Ensure the appliance is unplugged before changing
the door swing. If laying the appliance down, place
it on a blanket or similar item to protect fl ooring and
the fi nish of the appliance.
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hinge cover and upper hinge from
the top right side of the cabinet. Remove the
screw hole covers from the top left side of the
cabinet. Remove the door from the cabinet
2. Remove the adjustable foot and screw from
the bottom left side of the cabinet. Remove
the adjustable foot, lower right hinge and
door stopper from the bottom right side of the
cabinet. The lower left hinge can be found in
the accessory bag. Install the lower left hinge,
the door stopper and the adjustable foot on
the bottom left side of the cabinet. Install the
adjustable foot and screw on the bottom right
side of the cabinet. Save the lower right hinge
for future use.
3. Install the door on the cabinet. Install the upper
hinge on the top left side of the cabinet. Install
the screw hole covers on the top right side of the
cabinet. Ensure the rubber gasket is making a
good seal with the cabinet all the way around
the door before tightening the screws on the
upper hinge.
LEVELING INSTRUCTIONS
There are two adjustable legs on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level. It is important that the
appliance is level to minimize noise and vibration.
Move the appliance to its fi nal location. Turn the
leveling leg counter-clockwise as far as it will go,
until the top of the foot is touching the bottom of the
cabinet. Slowly turn the leveling leg clockwise until
the appliance is level.
1
3
2
Loading ...
Loading ...
Loading ...