Andis 74100 GTX-EXO Professional Cord/Cordless Lithium-ion Electric Beard & Hair Trimmer with Charging Stand

Use & Care Instructions - Page 4

For 74100.

PDF File Manual, 28 pages, Read Online | Download pdf file

74100 photo
Loading ...
Loading ...
Loading ...
4
attempt to replace battery. When repair or
replacement is required, send or take it to an
Andis authorized service station.
14. Batteries can be harmful to the environment if
disposed of improperly. Many communities offer
recycling or battery collection. Contact your local
government about disposal practices in your area.
15. Plug adapter cord directly into an AC outlet. Do
not use an extension cord.
16. WARNING: Never touch both terminals on
trimmer with metal objects and/or body parts, as
short circuit may result. Keep away from children.
Failure to comply with these warnings could result
in fire or serious injury.
17. WARNING: During use, do not place or leave
appliance where it may be 1) damaged by an
animal or 2) exposed to the weather.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR PROFESSIONAL USE
OPERATING INSTRUCTIONS
CHARGING TRIMMER USING CHARGING STAND
The AC adapter is intended for use with Andis model ORL-S lithium-ion
trimmer battery with a rated capacity of 4.5V
1.2A. Remove the trimmer
and AC adapter from the carton. Plug the AC adapter into a 120V AC
outlet, or according to your local power standards. Plug the adapter cord
into the receptable on the back of the charging stand (Figure A). Place
trimmer in the charging stand. The ON/OFF switch on the trimmer must be
in the OFF position for the battery to charge. The blue light on the trimmer
will fade in and out while charging. Note that the trimmer can be removed
at any time during the charging cycle without harming the trimmer or
Loading ...
Loading ...
Loading ...