Loading ...
Loading ...
Loading ...
-14-
Filter Pad Replacement
Filter pads should be replaced daily to maintain filtering efficiency and to ensure good hygiene.
Filter unit must be empty. If the unit has recently been used for filtering, allow sufficient time for items
inside the tank to cool to a safe handling temperature before proceeding.
1) Remove strainer and place the return tube assembly to the storage position (refer figure F).
2) Release filter clamp by rotating latch handle a ΒΌ turn in either direction (refer figure D). Pivot
clamp to upright position. (Remove if cleaning required).
3) Remove old filter pad. Remove any crumbs or residue from inside of tank by wiping clean
(refer figure G).
4) If required, the filter plate can also be removed, cleaned, and refitted (refer figure B).
5) Fit new filter pad with rough surface up.
NOTE: The pad has one corner removed which must line up with the corner bracket in the
front of the tank (refer figure C).
6) Refit filter clamp and secure latch (handle facing rear of tank, refer figure D). Refit strainer.
Filter unit is now ready to be used.
4) Fit filter clamp over filter and lock into place by rotating handle (refer figure D).
5) Place strainer frame on filter unit (refer figure E), Filter is ready for use.
Figure D. Figure E.
Filter Clamp
Frame in filtering position
Figure F. Figure G.
CARBON FILTER PADS - OPTION
Loading ...
Loading ...
Loading ...