SLSNJWR50.3 User Manual

Loading ...

www.SereneLifeHome.com

ASSEMBLING STEPS

1. Identify a suitable location with two trees and no obstacles or hazards with an

even, soft surface beneath. Strong and mature trees, with a minimum

circumference of 36 inches serve as suitable anchors.

2. Wrap the tree protectors around both trees. If the tree circumference is too large

for the tree protector, ensure the protector is applied to the back and sides of the

tree - the front of the tree does not sustain force from the slackline.

3. The tree must be able to withstand a minimum force of 3,000 kgs. Use the tree

protector to protect both the tree and slackline set. Ensure the tree is free of dry rot.

ANCHOR THE SLACKLINE

Wrap the slackline without the ratchet

around the tree protector and tree trunk.

Pass the line through the loop and pull so

the line wraps tightly around the trunk of

the tree. To keep the slackline at during

use and ensure an optimal experience,

ensure the end exiting through the loop

creates a V shape.

The ideal height will vary based on the user.

When used as an obstacle course, we

recommend the user stand near the tree,

with their feet at on the group and arms

raised - place the line 3-6" above their

extended arms. When used as a slackline,

we recommend placing it at knee height

of the user, or lower, and no higher than 20"

from the ground.

ANCHOR THE RATCHET ON THE OPPOSITE

TREE

Wrap the strap attached to the ratchet

around the tree protector and tree trunk.

Pass the ratchet through the loop with the

ratchet handle facing down. Pull and adjust

the line so it wraps tightly around the tree

trunk. Make the line at and ensure the line

exiting the loop creates a V shape.

Loading ...

SereneLife SLSNJWR50.3 Ninja Warrior Obstacle Course for Kids