Loading ...
Loading ...
Loading ...
4
R
a
di
o
Op
era
ti
on:
1. To select radio band
In RADIO mode, press the BAND button shortly and repeatedly to select your desired radio band in
sequence and circulation as follows:
-->FM1-->FM2-->FM3-->AM1-->AM2-->
2. To select for radio station manually or automatically
Press >>| or |<< button to automatically search up or down for radio station frequency,
Press >>| or |<< button and hold for about 2 seconds to activate MANUAL searching mode.
Then press >>| or |<< button repeatedly to manually search up or down for your desired station from the
current frequency.( If in MANUAL Mode and without further operation, the unit will change to AUTO mode
a few seconds later.)
3. To store the current station or turn on the preset station In RADIO mode:
A) Press one of 1-6 number buttons and hold for about 1 second to store the current station in the
preset memory bank of the number button for the current band.
When a RDS station is being stored, PI, PS, AF list are stored.
B) Press one of 1-6 number buttons to turn on the preset station stored in the preset memory bank of
the number button for the current band.
In RDS mode, the strongest AF is turned on after AF searching.
4. To automatically store for the strongest stations and scan for each stations
A) Press APS button and hold for about 1 second, it will search from the lowest frequency and check
the signal strength until 1 cycle search is finished on current band. Then the 6 strongest available stations
will be preset to the corresponding preset numbers. When the Auto-storage operation is completed, it will
execute the Preset Scan continuously.
B) Press the APS button to scan all preset stations in the memory of the current band and stay on each
memory stations for about 5 seconds.
To stop preset scan, press this button again.
C)
Press the SCAN button to scan the radio frequency. If a valid signal has detected, the current frequency
will be hold and blinking for 5 seconds, then press SCAN again to stop and remain the current frequency;
otherwise, the radio will go on to scan the other radio frequency 5 seconds later.
5. To tune for RDS station
Press and hold PTY button for about 1 second,
the PTY group is on, then rotate the VOL knob
to select one of the following mode:
<-->NEWS<-->AFFAIRS<-->INFO<-->SPORT<-->EDUCATE<-->DRAMA<-->CULTURE
<-->SCIENCE<--> VARIED<-->WEATHER<--> FINANCE<-->CHILDREN<-->SOCIAL
<-->RELIGION<-->PHONE IN<-->TRAVEL<-->LEISURE<-->DOCUMENT< -->ALARM
<-->POP M< -->ROCK M<-->EASY M<-->LIGHT M<--> CLASSICS<-->OTHER M
<-->JAZZ<-->COUNTRY<-->NATION M<-->OLDIES<-->FOLK M<-->TEST
After selecting one of the PTY programs, press >>| or |<<,it will automatically search for the station of the
PTY program. If the station of the PTY program does to exist, it will display PTY NONE and then return back to
the
previous radio.
6. To alternate the weak signal in RDS station with a strong one
Press SEL button and hold for about 1 second to turn on MENU mode, then press SEL button
repeatedly to select AF mode, rotate the VOL knob to select AF ON, t hen AF flash in display.
When AF switching mode is selected, the radio checks the signal strength of AF all the time. The
Loading ...
Loading ...
Loading ...