Loading ...
Loading ...
Loading ...
DRILL-DRIVER
Chuck
Motor
Gear Train
No Load Speed
Clutch
Craftsman
380
320
28O
315.114540
1/2 in. Keyless
DC Motor 18 Volt
Two Speed
0-350 RPM (Low)
0-1300 RPM (High)
24 Positions
MaximumTorque
CHARGER
Rating
ChargingVoltage
Charge Rate
BATTERY PACK
(for 114540)
BATTERY PACK
(for 114350 combo)
EX 114540 - 18V test criteria
in.lb, torque
#8 x 1.25 in. wood screws in low speed per battery pack charge into pine lumber.
3/8 in. diameter holes per battery pack charge into 2 in. nominal pine lumber.
380 in.lb.
Item No. 9.11041
(1425301)
120 V, 60 Hz, AC only
7.2 - 24 Volt
1 Hour
Item No. 9_11045
(1323514)
1323905
KNOW YOUR DRILL-DRIVER
See Figure I.
Before attempting to use your drill-driver, familiadze
yourself with all operating features and safety
requirements.
KEYLESS CHUCK
Your drill-driver has a keyless chuck that allows you to hand
tighten or release drillbit in the chuck jaws.
SWITCH
To turn your driIFdriver ON, depress the switch trigger.
Release switch trigger to turn your drill-driver OFF.
SWITCH LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
VARIABLE SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
TWO SPEED GEAR TRAIN
Your drill-driver has a two speed gear train designed for
drilling or driving at HI or LO speeds. A slide switch is
located on top of your drill to select either HI or LO speed.
FORWARD/REVERSE SELECTOR
(DIRECTION OF ROTATION SELECTOR)
Your drill-driverhasa fo_ard/raverse selector located
above the switch trigger.
WRIST STRAP
A wriat strap isprovided to reduce the chancesof
dropping your drill-driver, Place one hand through the wrist
strap when carryingtool.
BIT STORAGE
When not in use, bitsprovidedwith yourdrill-drivercanbe
placed inthe storagearea located onthe bottomof the
motorhousing.
LEVEL
To keep drillbit levelduringdrillingoperations,a level is
located on thetap and end ofthe motorhousing.
_1 WARNING: ffanyparts aremissing, do notoperate
yourddll-driveruntilthe missing partsarereplaced.
Failuretodo so could resultinpossibleserious
personalinjury.
7
Loading ...
Loading ...
Loading ...