Casio ECB-40DB

User Manual - Page 19

For ECB-40DB.

PDF File Manual, 30 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (D) to scroll through alarm numbers
([AL1] to [AL5]) until the alarm you want to
configure is displayed.
Alarm number
Alarm time
3. Hold down (B) for at least two seconds.
Release the button when the hour setting
starts to flash.
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Alarm hour
4. Use (A) and (D) to change the hour setting.
Holding down (A) or (D) scrolls through
settings at high speed.
If you are using 12-hour timekeeping,
[P] indicates p.m.
5. Press (C).
This causes the minutes digits to flash.
Alarm minute
6. Use (A) and (D) to set the minute setting.
7. Press (B) to complete the setting
operation.
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
The watch will automatically return
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
Testing the alarm
In the Alarm Mode, hold down (D) to sound the
alarm.
To stop the alarm
Pressing any button while the beeper is
sounding stops it.
Enabling the Hourly Time
Signal
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Use (D) to display the hourly time signal
screen ([SIG]).
3. Press (B) to toggle the hourly time signal
between enabled and disabled.
[SIG] is displayed while the hourly time
signal is enabled.
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
sound again, turn it back on.
Note
Indicators are displayed while any of
the alarms or the hourly time signal is
turned on.
The applicable indicators are not
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Alarm
Hourly time signal
Watch Operation Guide 5708
19
Loading ...
Loading ...
Loading ...