Loading ...
Loading ...
Loading ...
— 16 —
Maintenance
Replacing the Light Pucks
Cleaning Filters
IMPORTANT: Drain oil from spacers, lters, oil tunnels, oil containers before oil and residue overow!
• Remove all spacers, lters, grease tray, and oil containers and discard oil and residue.
• Wash with warm soapy water. NOTE: Stainless steel lters, spacers and oil tunnel are top rack dishwasher safe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filters should be cleaned after every 30 hours of use.
• Should lters wear out due to age and prolonged use, replace with a new lter.
u
Make sure the range hood is unplugged or turn OFF
breaker.
v
Remove lter. Reach into interior of range hood until
touching both lateral clips located on the side of
thepucklight.Gentlysqueezeandpushdownuntil
puck pops out from its location, pull out the LED
puck and unplug it.
CAUTION: PUCK MAY BE HOT, PLEASE TAKE
OUT THE PUCK WHEN THE PUCK IS
COMPLETELY COOL!
w
Replace with a 120 Volt, 2 Watt max, LED lights.
Plug in new puck and push back into light panel.
x
Turn ON breaker and range hood to test for
operation.
IMPORTANT:
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE CARRYING OUT ANY OPERATION
ON THE APPLIANCE.
Fig #6 Fig #7
Cleaning Filter
IMPORTANT: Drain oil from spacers, lters, oil tunnels, oil containers before oil and residue overow!
• Remove all spacers, lters, grease tray, and oil containers and discard oil and residue.
• Wash with warm soapy water. NOTE: Stainless steel lters, spacers and oil tunnel are top rack dishwasher safe.
• Dry thoroughly before replacing and follow directions for installation in reverse.
• Filter should be cleaned after every 30 hours of use.
• Should lter wear out due to age and prolonged use, replace with a new lter.
Loading ...
Loading ...
Loading ...