Loading ...
Loading ...
Loading ...
21
OPERATION
■ Place the blower on a level surface, outdoors.
■ Press the primer bulb 5 times.
■ Make sure the choke lever in the RUN position.
■ Lift the start button cover and press the start button until the engine starts. Then engage the throttle
lever to start the blower.
To stop the blower: Press the STOP switch to the stop position “O” until the blower stops (Fig. 17).
BATTERY INDICATOR (See Fig. 18)
A battery indicator is located above the start button,
and can be used to indicate the battery status (Fig. 18).
When pushing the start button to start the engine, a
green light indicates a fully charged battery; a red light
indicates the battery needs to be charged.
CRUISE CONTROL LEVER (See Fig. 19)
The cruise control lever can be used to operate the blower without holding the throttle lever.
■ To engage, operate the throttle lever toward the suitable speed position for blowing, and then press
down the cruise control lever (Fig. 19).
■ To release, lift the cruise control lever up.
Fig. 17
Fig. 19
II
I
Fig. 18
Battery Indicator
Loading ...
Loading ...
Loading ...