Loading ...
Loading ...
Loading ...
www.PyleUSA.com
5
Put the washers on the bass drum boles and put the drum head on.
Please pay attention the logo position when you put the drum head on.
Using the tuning key to make the drum head tight. Please pay attention that,
don’t tighten one screw too tight without tightening other screws. The correct
way is tighten one screw a little, and then tighten the opposite screw a little,
then tighten the besides screw a little, then tighten the left screw a little. Then
tighten again by this turn.
Loading ...
Loading ...
Loading ...