Loading ...
Loading ...
Loading ...
Assemble the Lower Chimney Cover:
•
•
Slide the Lower Decorative Chimney trim (2.1)
over the fan body.
Ensure that the Decorative trim is pressed
down to line up the lower mounting holes (A)
Insert 2 short sheet metal screws (12) in the
lower holes
• Place Chimney mounting bracket (21) at the top
of the Lower Decorative Chimney (2.1), and
insert 2 short sheet metal screws (12) into the
outer most holes on the bracket at location B
Pre-Assemble the Upper Chimney Cover and:
• Remove the protective foil from the Upper
Decorative Chimney (2.2)
• Slide the Upper Decorative Chimney trim (2.2)
down between the fan body and the Lower
Decorative Chimney trim(2.1)
o
It should be exposed about 0.25" above
the Lower Decorative Chimney trim
Hang and Mount the Vent Hood:
• Hang the vent hood onto fixing bracket 20
• Level the hood, and insert 2 long screws (10 )
into bracket 21 at level C
Install Duct and Insert Plug:
• Install 6" duct over the flange on the fan body
• Use 2" wide metal tape to make an air tight
seal between the duct and the fan body
• Install a clamp to secure the ductwork
securely
• Remove Carbon Filters if installed ented applications
• Insert the plug into a properly grounded outlet
IMPORTANT
• The vent hood should be lifted and
installed by 2 people to prevent injuries
and potential damage
WARNING
Electrical Shock Hazard
• This unit must be grounded. This
appliance is equipped with a cord
having a grounding wire with a
grounding plug. The plug must be
plugged into an outlet that is
properly installed and grounded.
• Do not use an extension cord. If
the power supply cord is too
short, have a qualified electrician
install an outlet near the
appliance.
Right
Wrong
12
A
B
0
8
Loading ...
Loading ...
Loading ...