Loading ...
Loading ...
Loading ...
8
When the machine is obstructed, please turn off the switch right away and
check if the work piece is right. An obstruction may cause the machine motor
to be burned.
APPLICATION
OPERATING PROCEDURES
Notice: This tool is cordless and does not need to be connected to a power supply.
CAUTION: Do not expose either the tool or charger to the rain or water. Do not
overcharge the battery as this may damage the battery. If the battery power is low,
stop working and recharge the battery pack.To prolong the using life of the tool, do
not work continually for more than 20 minutes at a time.
INSTALL SOCKETS (SEE FIG. 4)
Choose a 1/2’’ driver socket of the correct size and mount it on the drive shaft.
After you place the socket over the fastener, it will self-locked when you align the hole
in the socket with the hole in the fastener.
This tool is intended for loosening and tightening nuts and bolts with a
1/2'' drive impact sockets.
FIG.4
Loading ...
Loading ...
Loading ...